It’s been said that the soundtrack is up to 80 per cent of the movie-going experience. And the centre speaker is the most crucial part of that. Say ‘hej’ to Emit 25C…

It could be argued that the centre channel is the most important part of any surround-sound system. It’s where the lion’s share of dialogue comes from in a movie, and it’s where the focal point of the music often comes from in a multi-channel mix. It’s crucial to get it right.

Emit 25C gets it right.

It’s essentially an Emit 30, turned on its side, with the mid/bass drivers placed either other side of the tweeter. The drivers are the same; the crossover is the same, with a different box and port-tuning. But that’s not doing it a disservice; quite the opposite. It means you get total consistency between the centre speaker and the two flanking it (whether those are Emit 10s, 20s, 30s or even 50s), along with any others you place around your listening position.


High-quality mid/bass drivers

Emit 25C uses the same 14cm MSP woofers as Emit 10 and Emit 30. MSP stands for Magnesium Silicate Polymer.

It’s a material we developed decades ago, and have been refining ever since for use in all our most legendary speakers (including Confidence, Contour, Heritage Special and many more). MSP provides exactly the right combination of lightness, stiffness and damping to reproduce your material with all the detail the artist wants you to hear. Each cone is made in one piece, with an integrated dust-cap. The ‘balance ribs’ you’ll see in the centre are bonded directly to the voice-coil, so the whole mechanism moves as one piece – bringing with it immense control and detail over its sound.

The voice-coils themselves are made from lightweight aluminium wire, clad in a thin layer of copper. We’ve use aluminium here on the two-layer glass-fibre former because its weight doesn’t impede the driver’s movement. The copper layer means it can take more advantage of the magnetic energy generated by the dual-stacked ferrite magnet system. It magnifies that flux energy for more power – without sacrificing fleet-footed dynamics.

Top-end performance

Emit 25C has a high-performance Cerotar tweeter, along with all other Emit speakers – and the award-winning Evoke family.

It’s based on the renowned Esotar Forty tweeter found in our Special Forty anniversary speaker, and features innovative technology that reduces unwanted resonance and optimises airflow. As with Evoke, Confidence and Contour i (among others), it also has a secret innovation: the Hexis. This is a small dimpled inner dome that reduces reflections to the back of the playing surface. You’ll hear its effect in the form of incredible detail resolution: sweet, smooth treble that doesn’t fatigue your ears – even during a long listening session.

Danish cabinet design

Emit 25C is available in three custom laminate finishes: Black, White and Walnut.

They’re designed to complement each other, and blend seamlessly into your living room. That’s especially important for a centre channel, where (as much as we hate to say it), you should be spending more time looking at the picture above it than the speaker itself.

Emit 25C is the lynchpin of your home cinema speaker system. Power, control and finesse, rolled into one compact unit.

Emit
Features

Designed and engineered in Denmark

The entire Emit family has been put through its paces in our world-class Jupiter measuring facility at Dynaudio Labs. We treat it exactly the same as we do every other speaker in our range: no stone left unturned.
2022_Dynaudio_WebIcon_ConeGraphic_60x60px_Black
Cerotar tweeter

Emit uses the highly regarded Cerotar tweeter from our Evoke series. It's a high-quality high-frequency driver inspired by our top-end Confidence and Heritage Special speakers, and includes the innovative resonance-defeating Hexis inner dome.
2022_Dynaudio_WebIcon_ConeGraphic_60x60px_Black
Clean and simple

Each speaker in the Emit range is designed to fit with modern lifestyles and interiors. Clean lines, simple finishes and minimalist Scandinavian looks – whether you're listening in stereo or have a full multi-channel system.

Emit 25c specifications:

Status Current
Segment Home
Range Emit
Type Center
Sensitivity (dB @ 2.83V/1m) 87
IEC Power Handling (Watt) 180
Rated Impedance (Ohm) 4
Lower Cutoff (Hz @ +/- 3 dB) 53
Upper Cutoff (kHz @ +/- 3 dB) 25
Lower Cutoff (Hz @ -6 dB) 46
Upper Cutoff (kHz @ -6 dB) 35
Box Principle Bass reflex rear double flared port
Crossover 2.5-way
Crossover Frequency (Hz) (1000)/3500 Hz
Crossover Topology 1nd order tweeter / 2nd order woofer
Tweeter 28mm Cerotar soft dome with Hexis
Midrange/Woofer 14 cm MSP
Woofer 14 cm MSP
Weight kg 11
Weight lbs 24 2/8
Width mm 550
Height mm 170
Depth mm 272
Width inches 21 5/8
Height inches 6 6/8
Depth inches 10 6/8
Width mm incl. feet/grill 550
Height mm incl. feet/grill 170
Depth mm incl. feet/grill 285
Width inches incl. feet/grill 21 5/8
Height inches incl. feet/grill 6 6/8
Depth inches incl. feet/grill 11 2/8
Packaged Width mm 652
Packaged Height mm 405
Packaged Depth mm 280
Packaged weight kg 13,3
Speakers per packaged box 1
Grille Black