Position Monitoring allows remote monitoring of the Ball Valve position. The Position Monitoring circuit can also be used as part of an engine or generator start interlock to ensure these don’t start without cooling water available.

TRUDESIGN™ Certified Ball Valves are specifically designed for use in marine applications above and below the water
line.
Features:
▪ Allows remote monitoring of up to four Ball Valves (per seacock display panel) in the open or closed position.
▪ Can be wired into or part of an engine or generator start “interlock” to ensure they don’t start without cooling
water available.
▪ Manufactured from a glass-reinforced Nylon composite – High strength, tough and light weight.
▪ Immune to corrosion & electrolysis – No corrosion breakages, increased safety.
▪ Electrically non-conductive. No electrical bonding.
▪ Suitable for use on all hull types - aluminium, steel, wood or FRP.
▪ The ball and sealing rings utilise a PTFE polymer to ensure a smooth action and minimal fouling of the internal
ball.
▪ Can be “locked” in the closed position to comply with toilet waste outlet regulations. US Coast Guard
Regulation 33 CFR 159.7 and ISO Standard 8099 for locking of toilet waste outlets
▪ Large operating temperature range – From -40°C to +110°C ( for Ball Valve only)
▪ Available in both BSP and NPS thread forms
▪ U.V resistant – Will not degrade or discolour from the sun’s ultraviolet rays.
▪ 100% leak tested before leaving factory.