Shopping security
Buying a lift can feel risky when you’re juggling ceiling height, slab requirements, and whether the arms will actually reach your vehicles. The AMGO BP-12 takes that stress off your plate by pairing a true 12,000 lb capacity with extra-long 3-stage arms that grab everything from sedans to ¾-ton pickups with confidence. With a low 4.5 inch pad height, you won’t fight to get under lower vehicles, and the open-top floorplate design keeps the bay clear for tall roofs and open doors. Two install widths let you fit the posts to your shop, not the other way around. If you’ve been searching for a dependable 2 Post Lift that just works, this one’s designed to make setup and daily use simple. 12K baseplate options are even rarer than 10K because most manufacturers won't engineer the structural load path for 12K through floor-routed cables. AMGO's BP-12 is one of the few that does it cleanly with a heavier-spec hydraulic and structural design.
Shops choose the BP-12 because it blends muscle with efficiency. Lift time is about 65 seconds, so you’re in the air quickly without stressing the hydraulic system. You’ll get 72.5 to 73 7/8 inches of pad height with standard pads, or up to 81 9/16 to 82 7/8 inches with the included 3 inch and 6 inch extensions. Drive-thru clearance adjusts to roughly 104 7/16 to 109 13/16 inches depending on which width you pick, so big trucks aren’t squeezing through a bottleneck. The single-point lock release lets you drop from both columns on one side, speeding up workflows during busy days. It’s a professional, commercial vehicle lift that still fits a lot of home shops with 10.2 foot ceilings or higher. Width options of 145-3/8 or 150-3/4 inches let you size the bay layout to your fleet, with drive-thru clearance from 104-7/16 to 109-13/16 inches. The 5" concrete requirement is heavier than baseplate norms but appropriate for the 12K rating.
Durability is baked in, not bolted on. Chain-drive cylinders with UHMW sliders and bronze bushings handle daily cycles smoothly and stand up to wear. Synchronized Aero cables keep columns in step, and automatic arm restraints lock in position once you start lifting. Anchors, pads, saddle adapters, 3 inch and 6 inch stackable extensions, toe guards, and tool trays are all in the box, so you aren’t piecing together a kit after delivery. AMGO backs it with a 5-year steel, 3-year hydraulic, and 2-year electrical warranty, which is exactly what you want on a 12000 lb 2 post lift built for real shop work. Whether you call it a 2 post car lift or simply your next revenue driver, the BP-12 is ready for the grind. For shops handling crew cabs, lifted SUVs, and light commercial vehicles in a residential or low-ceiling commercial bay, the BP-12 fills a niche most other manufacturers don't address.
Need something different? Explore all our 2-post lift options.

• Extra-Long 3-Stage Arms: These arms extend and retract to reach a wide mix of wheelbases without awkward spotting. The three-stage design gives you more front-to-rear reach to hit proper lift points on sedans, SUVs, and ¾-ton trucks. In practice, that means fewer re-spots, faster setups, and safer, more stable lifts with less hassle throughout the day.
• Two Install Widths for Flexible Bay Fit: Choose 118 1/8 or 123 1/2 inches between posts to match your space and vehicles. The adjustable drive-thru clearance, roughly 104 7/16 to 109 13/16 inches, helps larger trucks enter comfortably. You’ll optimize door swing and arm reach while keeping traffic flowing through your shop.
• Dual-Safety, Heavy-Duty Construction: Synchronized Aero cables keep columns balanced, while chain-drive cylinders with UHMW sliders and bronze bushings deliver smooth motion. The structure is engineered for a true 12,000 lb rating, not just marketing copy. It’s built to handle daily commercial cycles as a reliable commercial vehicle lift.
• Complete Kit with Adapters and Hardware: Pads, saddle adapters, 3 inch and 6 inch extensions, anchors, toe guards, tool trays, and protective covers are included. You won’t chase extra parts or wait on add-ons to finish your install. That means faster commissioning and fewer hidden costs after delivery.

Minimum Garage Requirements
✔ Ceiling Height: At least 128" (10'8") recommended ✔ Footprint: 109" drive-thru x 145" overall (9'1" x 12'1") ✔ Concrete Thickness: Minimum 4" (101.6 mm) ✔ Concrete Strength: Minimum 3,500 PSI compressive ✔ Electrical: 2.0 HP, 220V, 60Hz, single-phase ✔ Overall Lift Height: 122" (10'2") (measure before ordering)
✔ Ceiling Height: At least 128" (10'8") recommended
✔ Footprint: 109" drive-thru x 145" overall (9'1" x 12'1")
✔ Concrete Thickness: Minimum 4" (101.6 mm)
✔ Concrete Strength: Minimum 3,500 PSI compressive
✔ Electrical: 2.0 HP, 220V, 60Hz, single-phase
✔ Overall Lift Height: 122" (10'2") (measure before ordering)
*Concrete must meet the manufacturer's minimum requirements as specified above. Installing this lift on inadequate concrete may result in serious injury or death. It is the customer's responsibility to verify concrete thickness and strength prior to purchase and installation. Stacking taller vehicles vertically may require additional ceiling height. Measure your specific vehicles before ordering.
AMGO BP-12 12,000 lb 2-Post Car Lift Specifications |
|
| Manufacturer | AMGO |
| Capacity | 12,000 lb |
| Lift Time | ~65 seconds |
| Max Lifting Height at Pads | 72.5 to 73 7/8 in (no extensions) |
| Max Lifting Height at Pads with Extensions | 81 9/16 to 82 7/8 in (with 3 in and 6 in extensions) |
| Max Lock Height at Pads | 70 9/16 to 71 7/8 in (no extensions) |
| Max Lock Height at Pads with Extensions | 79 9/16 to 80 15/16 in |
| Overall Height | 122.5 in |
| Overall Width Options | 145 3/8 in or 150 3/4 in |
| Width Between Columns | 118 1/8 in or 123 1/2 in |
| Drive-Thru Clearance | 104 7/16 to 109 13/16 in |
| Minimum Pad Height | 4.5 in |
| Power Unit | 2.0 HP, 220V, 60Hz, single-phase |
| Anchors Included | 3/4 in × 6.5 in, qty 12 |
| Shipping/Gross Weight | ~2,169 lb |
| Concrete Requirements | Indoor, level slab ≥ 5 in thick, ≥ 3,500 psi, no rebar in anchor zone, cure ≥ 15 days |
| Electrical Requirements | Dedicated 220V single-phase circuit, proper grounding by qualified electrician |
| Ceiling Requirement | Greater than 10.2 ft |
| Safety Systems | Single-point manual lock release, automatic arm restraints, synchronized Aero cables |
| Arms | Four extra-long 3-stage arms, moon-gear locks |
| Included Adapters | Heavy-duty single-screw rubber pads, saddle adapters, 3 in and 6 in stackable extensions |
| Included Accessories | Toe guards, tool trays, protective safety-device covers, complete hardware |
| Recommended Hydraulic Oil | ISO 46 AW |
| Maintenance Highlights | Monthly anchor torque and hose checks, lube sliders and cables; 6-month cable tension check |
| Warranty | Steel Structure (columns, carriages, arms, beams, ramps, etc.): 5 Years Hydraulic Parts (cylinders, seals, hoses, fittings): 3 Years Other Parts (excl. Consumables), electrical, power units: 2 Years |
Ready to upgrade your garage? Talk to a Lift Specialist or explore more options.
Ships within 48 hours · Estimated delivery Jun 24 - Jun 29
US$40
Get nowSign up to your membership to get coupons up to
15%
Get nowOpportunity to enjoy order discount up to 15% off
Top-Converting Item to Boost Your Average Order