You can directly transfer your original RAID Group disks into this enclosure, and the system will be immediately ready for use. No RAID re-creation or additional software configuration is required, significantly reducing data migration costs and risks.

SATA III is currently the most widely adopted SATA interface standard. It has a theoretical maximum transfer speed of 6 Gbps (approximately 600 MB/s). Actual sustained read/write speeds depend on the drive type.
* SATA SSDs: Can reach 500–560 MB/s
* 3.5" HDDs: Typically deliver 240–285 MB/s (mainstream models usually range from 180–260 MB/s)

This enclosure features a USB-C 3.2 Gen 2x2 20 Gbps upstream port, which removes the interface bottleneck and allows every drive to operate at its full potential. In RAID 5 mode with multiple 2.5" SATA SSDs, the enclosure can achieve real-world aggregated speeds of 1300–1600 MB/s, fully utilizing the 20 Gbps bandwidth for high-performance storage arrays.

Safety Lock Design
SATA III 6Gbps High speed
20Gbps speeds in RAID 5 mode
6 RAID Array Modes
10min Auto-Sleep
Single Disk up to 30TB
Built-in High Speed Fan
Support 2.5/3.5 inch SATA HDD/SSD

This enclosure requires RAID 5 mode to achieve speeds of 20Gbps. It supports RAID 0, RAID 1, RAID 10, JBOD, RAID 5, and PM modes. You can adjust the RAID mode according to your needs.